The other day we ran out of our doTerra Easy Air stick which we’ve been using daily on the kids to get them to sleep at night through their congestion.
I had some beeswax on hand and decided to try making it from scratch. It was a lot easier than I thought it would be. I didn’t have any cocoa butter on hand but instead found a blog post about the basic ratios for beeswax and virgin coconut oil then just ‘winged’ it.
Since the weather is still quite warm, and virgin coconut oil is still liquid at room temperature, I thought I would start with a 1:1 ratio. Last minute, I decided to add a few tablespoons of jojoba and olive oil making this more into a 1:1.5 ratio.
Here’s my first attempt:
1. Add to a small pot equal parts of beeswax and virgin coconut oil. I used in this batch:
35g virgin coconut oil
2. Heat and melt over low flame. Let it cool for 5min.
3. Stir in liquid oil (any oil can be used here – should be increased to a total of 1/2 cup oil)
1 Tbsp jojoba oil
2Tbsp olive oil
60 drops of easy air or any other combination of pure essential oil
Note: If it starts to solidify too early, just melt over low heat.
4. Stir and immediately pour into ice cube tray or any other moulds.
5. Set in the fridge and then pop out and store in a cool dry place.
6. Can be stored separately in a small container for easy use. I found the sistema 35ml dressing pots a good size to store one cube.
Makes approx 6 cubes.
It’s now 26.5 degrees Celsius and found that it was still a little too hard for use, and parts of it took a little longer to melt into my skin. The great benefit of making your own is that you and tailor it to your own preference and needs. If you were to use this for massage, it might be nice to have a more solid bar, but for those with sensitive or thin skin, a softer bar (with more liquid oil) would be beneficial.
Next time I will try increasing the amount of oil vs beeswax using a 1:3 or even 1:4 ratio and possibly try it with shea butter and/or cocoa butter. This will mean an increase to 70g of virgin coconut oil.
This is quite fragrant but because it is so solid it takes longer to melt and so only a small amount comes off at once. I’m also thinking of boosting this other single oils next time.
This still turns out to be cheaper than buying the breathe stick plus I can make a tray of cubes at a time and have it stashed around in multiple places instead of hunting around the house for that elusive vapour stick.
Now that I’ve tried it once, it’s inspired me to think of other combinations of oils – I could use it as a lip balm, foot balm, healing salve, eczema salve… this also makes affordable gifts that can be easily be made in bulk (thinking end of year Christmas presents…) and you can play with the packaging and set it in a little lip balm pot or tin, or lip balm stick.
So there’s still some tweaking to do but I hope that this inspires you to give it a go. There are heaps of recipes out there and sometimes it can be paralysing to choose and then collect all the ingredients, so I like the fact that this has minimal ingredients and it still turned out ok. It wasn’t that hard after all and worse comes to worse, you can always melt it down and adjust the proportions (although it would be best to do this before the oil is added so you don’t accidently evaporate the oil off).
Well, good luck DIY-ing and let me know if you find any great recipes for me to try!
Disclaimer: These statements have not been evaluated by the Food and Drug Administration. Products mentioned are not intended to diagnose, treat, cure, or prevent disease